Heser Balanced P-Valve


Tax excluded *

Depending on your delivery address, VAT may vary at Checkout. More information

New product

1 -8 days or we contact you!

Add to compare

Heser P-Valve

Features of the valve:

  • the valve does not need to be glued in
  • the sealing against the suit is made by an O-ring and is therefore very reliable
  • the valve can be easily removed from the suit for cleaning and installed without causing problems with the tightness of the suit
  • the height in the suit is only approx. 13mm, nevertheless the same flow is achieved as with known valves
  • since the valve is not held in the suit by a central thread, but by five screws
  • when the cap is opened, it cannot be accidentally unscrewed in the suit, which would lead to fatal water ingress
  • the valve can be opened and closed completely with one turn
  • the valve has a defined clean stop for the closing cap
  • Technical data:
    • Flow rate at 0.5m water column (equivalent to 0.05bar): 2 liters/min
    • hole diameter in the 20mm
    • Height in the suit approx. 13mm
    • Cap diameter: 42mm
    • height outside the suit approx. 20mm
    • suitable for trilaminate and similar suits. When installing in wetsuits must first be glued a Cordurapad

Scope of delivery:

  • 1 x PeeValve
  • 0,4m hose
  • 1 x Torx screwdriver
  • 1 x connection nipple (condoman connection)

If you have any questions, please contact esther.troesch@deepstop.de.

Related Items